Cartridge filter
The cartridge filters for liquids are mainly used to remove the solid particles from a liquid stream.
The filtering tool consists of a set of fibre glass or polyester felt or stainless steel cartridges arranged in a pack, chosen considering various parameters such as the required efficiency, the allowed pressure loss and the type and quantity of impurities of the liquid.
This type of filter can also be used for the removal of liquid particles from another liquid, involving the installation of particular coalescent cartridges or for the removal of solid particles from the liquid stream through particle cartridges for the separation.
In the first case the dragging liquids, present in the form of mist, will settle on the cartridge fibres forming small drops that will form more consistent drops, falling towards the bottom of the filter.
In the second case the solids will settle outside of the cartridge.
The materials used for the realization can be different: carbon steel, stainless steel and special austenitic ferritic steels such as Duplex, Super Duplex, Nickel alloys and Titanium Gr. 2, considering also the conditions in which the filters operate.
All filters can be supplied according to the most common international standards: ASME Sec. VIII, EN13445, BS BS500, AD2000 and can be tested according to PED2014 / 68 / EC requirements, supplied with CE mark and USTAMP as needed.
We can design thise type of filter for many applications but the principal one is the removal of solid particles.
The filter elements can be realized in all type of metallic and plastic materials, polyester, needlefelt and glass microfiber.
Type of liquids: industrial, food and beverage, water, hydrocarbon, gasoline, propane, corrosion inhibitor, methanol, oil, etc.
Max. Flowrate: No limits
Degree of filtration: No limits
Max. Pressure: 1500 Bar
Min. Pressure: -1 Bar
Max. Productivity: No limits
The filtering tool consists of a set of fibre glass or polyester felt or stainless steel cartridges arranged in a pack, chosen considering various parameters such as the required efficiency, the allowed pressure loss and the type and quantity of impurities of the liquid.
This type of filter can also be used for the removal of liquid particles from another liquid, involving the installation of particular coalescent cartridges or for the removal of solid particles from the liquid stream through particle cartridges for the separation.
In the first case the dragging liquids, present in the form of mist, will settle on the cartridge fibres forming small drops that will form more consistent drops, falling towards the bottom of the filter.
In the second case the solids will settle outside of the cartridge.
The materials used for the realization can be different: carbon steel, stainless steel and special austenitic ferritic steels such as Duplex, Super Duplex, Nickel alloys and Titanium Gr. 2, considering also the conditions in which the filters operate.
All filters can be supplied according to the most common international standards: ASME Sec. VIII, EN13445, BS BS500, AD2000 and can be tested according to PED2014 / 68 / EC requirements, supplied with CE mark and USTAMP as needed.
We can design thise type of filter for many applications but the principal one is the removal of solid particles.
The filter elements can be realized in all type of metallic and plastic materials, polyester, needlefelt and glass microfiber.
Type of liquids: industrial, food and beverage, water, hydrocarbon, gasoline, propane, corrosion inhibitor, methanol, oil, etc.
Max. Flowrate: No limits
Degree of filtration: No limits
Max. Pressure: 1500 Bar
Min. Pressure: -1 Bar
Max. Productivity: No limits
